© 2019 MV Technology Solutions Pty Ltd

  • Facebook App Icon

Cable, pipe and line entries

We have a full range of  cable, pipe and line entry systems. Our complete reliable sealing systems can be used for almost every supplication requirement. Whether it be for electricity, telecommunication, water, waste water, gas or district heating – whenever a perfectly safe sealing of building entries is required we have the best possible solution

Standard press seal, HRK-SSG

Split seal for retrofit installation

Standard press seal with super segmented ring technology and plastic press plates.

  • Super segmented ring technology for individual adjustment to cable diameters on site

  • Segments with exact diameter marking

  • Press plates have form-fit connections

For sealing cables in core drills or wall sleeves. Split design for sealing new cables to be installed or cables that have already been laid.

www.hauff-technik.de/en/

Standard press seal, HRD-SG

Split seal for retrofit installation

Standard press seal with super segmented ring technology or individual adjustment to cable diameters on site
For sealing cables in core drills, conduit or wall sleeves. Split design for sealing new cables to be installed or cables that have already been laid.

  • Super segmented ring technology for individual adjustment to cable diameters on site

  • Segments with exact diameter marking

  • Press plates have form-fit connections

 

www.hauff-technik.de/en/

Standard press seal, HSD

for building connections

For sealing a water line or a power cable and communications lines in core drills or wall sleeves.

  • optical and tangible installation security due to integrated control opening

  • Integrated segmented ring technology for individual adjustment to cable diameters on site

 

www.hauff-technik.de/en/

Cable entries, HSI-150 | HSI-90

Wall inserts and plastic flange

With a nominal diameter of 90mm ot 150mm, the HSI  is setting standards for cable entries for installation in concrete walls flush with shuttering. The HSI  wall insert offers maximum flexibility for retrofitting. It is delivered fitted with a pressure-tight closing cover as standard. Various closed or split system seals can be supplied for sealing cables depending on prevailing requirements. Seals for pressure-tight empty conduit connection are also available.

Hauff-Technik also offers the KES-M pressure-tight cable entry system, which is compatible with the HSI system. Featuring a Hateflex spiral hose and supporting various options for cable sealing, this system can relied upon to provide optimum protection for the cables that are being laid.

www.hauff-technik.de/en/

Flexible Spiral Heavy Duty Conduit | Hateflex 150mm & 90mm

The world most flexible robust conduit system

Pressure-tight flexible empty conduit system (external pressure 2.5 bar) with a smooth inner surface for gentle cable draw-in. Very flexible and stable cable duct hose.

 

A pressure-tight cable entry system can be created with the associated connection components.

  • Diameter 150 mm or 90mm

  • Sizes, 3M + 6M all compete roll 25M

www.hauff-technik.de/en/

Wall sleeves

Standard wall sleeves

As an expert in sealing products, we know that a leakproof building entry starts with getting the “hole in the wall” right first time. It is for this reason that we have dedicated several decades to the development of innovative, high-quality and easy-to-use wall sleeves and flange constructions.

We can supply products for installation flush with shuttering, for setting in mortar and for retrofit dowel-fixing. Fixed/loose flange constructions provide a reliable means of integrating bitumen thick coatings or waterproof sheeting, the use of which is prescribed according to EU standards for protection against water penetration from the outside or seepage water

www.hauff-technik.de/en/

 

 

Please reload