Product Listing


Medium Voltage products

  • Pfisterer11kV Longrod Insulator Tongue and Clevis End Fittings

    Pfisterer11kV Longrod Insulator Tongue and Clevis End Fittings

    11kV Longrod Insulator Tongue and Clevis End Fittings

    Manufacturer: Pfisterer

    Description: 11kV Longrod Insulator (Energex Approved) Tongue and Clevis. Approximate weight: 1.1kg, minimum creepage distance 385 mm and specified mechanical load (SML) 70 kN.



  • Pfisterer33 kV Longrod Insulator Tongue and Clevis - Straight End Fittings

    Pfisterer33 kV Longrod Insulator Tongue and Clevis - Straight End Fittings

    33 kV Longrod Insulator Tongue and Clevis - Straight End Fittings

    Manufacturer: Pfisterer

    Description: 33kV Longrod Insulator (Energy Australia Approved) SML and RTL. Approximate weight: 1.7kg, minimum creepage distance 1200 mm and specified mechanical load (SML) 70 kN.



  • Pfisterer11 to 132 kV - Longrod Insulators

    Pfisterer11 to 132 kV - Longrod Insulators

    11 to 132 kV - Longrod Insulators

    Manufacturer: Pfisterer

    Description: A full range of high quality silicone Longrod Insulators from 1,5 kV to 145 kV for the Australian market.



  • Pfisterer11 to 132 kV - Guy Strain Insulators

    Pfisterer11 to 132 kV - Guy Strain Insulators

    11 to 132 kV - Guy Strain Insulators

    Manufacturer: Pfisterer

    Description: A wide range of Guy Strain Insulators for the purposes of guy wire insulation on distribution line networks.



  • Pfisterer132 to 420 kV - Longrod Insulators

    Pfisterer132 to 420 kV - Longrod Insulators

    132 to 420 kV - Longrod Insulators

    Manufacturer: Pfisterer

    Description: A full range of high quality Silicone Longrod Insulators from 1,5 kV to 145 kV for the Australian market.



  • Pfisterer11 to 132 kV - Line Post Insulator

    Pfisterer11 to 132 kV - Line Post Insulator

    11 to 132 kV - Line Post Insulator

    Manufacturer: Pfisterer

    Description: These Insulators provide a technically superior replacement for the traditional ceramic type post insulator, used at the low to medium distribution voltage range from 1,5 kV to 145 kV.



  • PfistererCut Out Fuse Holders

    PfistererCut Out Fuse Holders

    Cut Out Fuse Holders

    Manufacturer: Pfisterer

    Description: Cut Out Fuse Holders provide protection to power lines and various devices on those lines such as transformers and capacitor banks. The range of cutouts is for 12 kV, 24 kV and 36 kV.



  • Pfisterer132 kV to 420 kV - Line Post Insulator

    Pfisterer132 kV to 420 kV - Line Post Insulator

    132 kV to 420 kV - Line Post Insulator

    Manufacturer: Pfisterer

    Description: These Insulators provide a technically superior replacement for the traditional ceramic type post insulator, used at the low to medium distribution voltage range from 1,5 kV to 145 kV.



  • Pfisterer66 Kv Longrod Insulator Ball and Socket End Fittings

    Pfisterer66 Kv Longrod Insulator Ball and Socket End Fittings

    66 Kv Longrod Insulator Ball and Socket End Fittings

    Manufacturer: Pfisterer

    Description: 66kV Longrod Insulator (Commonly used throughout private networks) Ball and Socket. Approximate weight: 3kg, Minimum creepage distance: 2250mm , and Specified mechanical load (SML): 120 kV.



  • Pfisterer66Kv Horz Post Insulator Trunnion Head with Gain Base End Fittings

    Pfisterer66Kv Horz Post Insulator Trunnion Head with Gain Base End Fittings

    66Kv Horz Post Insulator Trunnion Head with Gain Base End Fittings

    Manufacturer: Pfisterer

    Description: 66kV Horz Post Insulator (Energy Australia Approved) Trunnion Head with Gain Base. Approximate weight: 12.5kg, Minimum creepage distance: 2250mm and Specified cantilever load (SCL): 12.5kN.



  • Pfisterer22kV Longrod Insulator Ball and Socket End Fittings

    Pfisterer22kV Longrod Insulator Ball and Socket End Fittings

    22kV Longrod Insulator Ball and Socket End Fittings

    Manufacturer: Pfisterer

    Description: 22kV Longrod Insulator (SP AusNet Approved). Ball and Socket. Approximate weight: 1.27kg, minimum creepage distance: 560mm, specified mechanical load (SML): 70 kN.



  • Pfisterer132Kv Longrod Insulator Ball and Eye End Fittings

    Pfisterer132Kv Longrod Insulator Ball and Eye End Fittings

    132Kv Longrod Insulator Ball and Eye End Fittings

    Manufacturer: Pfisterer

    Description: 132kV Longrod Insulator (Energex Approved) Ball and Eye. Approximate weight: 5.4kg, Minimum creepage distance: 4500mm and Specified mechanical load (SML): 120kN.



  • Pfisterer33 kV Longrod Insulator Tongue and Clevis End Fittings

    Pfisterer33 kV Longrod Insulator Tongue and Clevis End Fittings

    33 kV Longrod Insulator Tongue and Clevis End Fittings

    Manufacturer: Pfisterer

    Description: 33kV Longrod Insulator (SP AusNet Approved) Tongue and Clevis. Approximate weight: 1.7kg, Minimum creepage distance: 970 mm and specified mechanical load (SML): 70kV.



  • Pfisterer33 kV Longrod Insulator Ball and Socket End Fittings

    Pfisterer33 kV Longrod Insulator Ball and Socket End Fittings

    33 kV Longrod Insulator Ball and Socket End Fittings

    Manufacturer: Pfisterer

    Description: 33kV Longrod Insulator (SP AusNet Approved) Ball and Socket. Approximate weight: 1.7kg, minimum creepage distance: 970mm and specified mechanical load (SML) 70kV.



  • Pfisterer132 kV Horz Post Insulator Trunnion Head and Gain Base End Fittings

    Pfisterer132 kV Horz Post Insulator Trunnion Head and Gain Base End Fittings

    132 kV Horz Post Insulator Trunnion Head and Gain Base End Fittings

    Manufacturer: Pfisterer

    Description: 132 kV Horz Post Insulator (Energy Australia Approved) Trunnion Head and Gain Base. Approximate weight: 27kg, Minimum creepage distance: 4500mm and Specified cantilever load (SCL): 13.3kN.



  • Pfisterer132 kV Horz Post Insulator Trunnion Head and Bendable Gain Base End Fittings

    Pfisterer132 kV Horz Post Insulator Trunnion Head and Bendable Gain Base End Fittings

    132 kV Horz Post Insulator Trunnion Head and Bendable Gain Base End Fittings

    Manufacturer: Pfisterer

    Description: 132 kV Horz Post Insulator (Energy Australia Approved) Trunnion Head and Bendable Gain Base. Approximate weight: 30kg, minimum creepage distance: 4500mm and Specified cantilever load (SCL): 13.3 kN.



  • Pfisterer132 kV Longrod Insulator Eye and Eye End Fittings

    Pfisterer132 kV Longrod Insulator Eye and Eye End Fittings

    132 kV Longrod Insulator Eye and Eye End Fittings

    Manufacturer: Pfisterer

    Description: 132kV Longrod Insulator (Energex Approved) Eye and Eye. Approximate weight: 5.4kg, Minimum creepage distance: 4500mm and Specified mechanical load (SML): 230kN.



  • Pfisterer33kV Longrod Insulator Ball and Socket End Fittings

    Pfisterer33kV Longrod Insulator Ball and Socket End Fittings

    33kV Longrod Insulator Ball and Socket End Fittings

    Manufacturer: Pfisterer

    Description: 33kV Longrod Insulator (Energy Australia Approved) Ball and Socket. Approximate weight: 1.2kg, Minimum creepage distance: 1000 mm and Specified mechanical load (SML) 70 kN.



  • Pfisterer33 kV Longrod Insulator Tongue and Clevis End Fittings

    Pfisterer33 kV Longrod Insulator Tongue and Clevis End Fittings

    33 kV Longrod Insulator Tongue and Clevis End Fittings

    Manufacturer: Pfisterer

    Description: 33kV Longrod Insulator (Energy Australia Approved) Tongue and Clevis. Approximate weight: 1.2kg, Minimum creepage distance: 1000mm and Specified mechanical load (SML): 70kN.



  • Pfisterer132 kV Horz Post Insulator Bendable Gain Base and 2 Hole Drop Tongue

    Pfisterer132 kV Horz Post Insulator Bendable Gain Base and 2 Hole Drop Tongue

    132 kV Horz Post Insulator Bendable Gain Base and 2 Hole Drop Tongue

    Manufacturer: Pfisterer

    Description: 132 kV Horz Post Insulator (Energy Australia Approved). Bendable Gain Base and 2 Hole Drop Tongue. Approximate weight 31kg, minimum creepage distance: 4500mm and specified cantilever load (SCL): 13.3kN.



  • Pfisterer22 kV Longrod Insulator Tongue and Clevis End Fittings

    Pfisterer22 kV Longrod Insulator Tongue and Clevis End Fittings

    22 kV Longrod Insulator Tongue and Clevis End Fittings

    Manufacturer: Pfisterer

    Description: 22kV Longrod Insulator (Energy Australia, Intergral Energy and Country Energy Approved). Tongue and Clevis. Approximate weight: 1.3kg, Minimum Creepage distance: 765 mm and Specified mechanical load (SML): 70 kN.



  • Pfisterer66Kv Horz Post Insulator Gain Base and 2 Hole Drop Tongue End Fittings

    Pfisterer66Kv Horz Post Insulator Gain Base and 2 Hole Drop Tongue End Fittings

    66Kv Horz Post Insulator Gain Base and 2 Hole Drop Tongue End Fittings

    Manufacturer: Pfisterer

    Description: 66kV Horz Post Insulator (Energy Australia Approved) Gain Base and 2 Hole Drop Tongue. Approximate weight: 12.8kg, Minimum creepage distance: 2250mm and Specified cantilever load (SCL): 12.5kN.



  • Pfisterer33 kV Longrod Insulator Tongue and Clevis End Fittings

    Pfisterer33 kV Longrod Insulator Tongue and Clevis End Fittings

    33 kV Longrod Insulator Tongue and Clevis End Fittings

    Manufacturer: Pfisterer

    Description: 33kV Longrod Insulator (Energex Approved) Tongue and Clevis. Approximate weight: 1.5kg, Minimum creepage distance: 1000mm and specified mechanical load (SML): 70kV.



  • Pfisterer66 Kv Longrod Insulator Ball and Y Clevis End Fittings

    Pfisterer66 Kv Longrod Insulator Ball and Y Clevis End Fittings

    66 Kv Longrod Insulator Ball and Y Clevis End Fittings

    Manufacturer: Pfisterer

    Description: 66kV Longrod Insulator (SP-AusNet Approved) Ball and Y-Clevis. Approximate weight: 3.5kg, Minimum creepage distance: 2250mm and Specified mechanical load (SML): 120kN.



  • Pfisterer132 kV Horz Post Insulator 2 Hole Drop Tongue and Bendable Gain Base

    Pfisterer132 kV Horz Post Insulator 2 Hole Drop Tongue and Bendable Gain Base

    132 kV Horz Post Insulator 2 Hole Drop Tongue and Bendable Gain Base

    Manufacturer: Pfisterer

    Description: 132 kV Horz Post Insulator (Energy Australia Approved) 2 Hole Drop Tongue and Bendable Gain Base. Approximate weight: 31kg, Minimum creepage distance: 4500mm and Specified cantilever load (SCL): 13.3kN.



  • Pfisterer66 Kv Longrod Insulator Eye and Eye End Fittings

    Pfisterer66 Kv Longrod Insulator Eye and Eye End Fittings

    66 Kv Longrod Insulator Eye and Eye End Fittings

    Manufacturer: Pfisterer

    Description: 66kV Longrod Insulator (Integral Energy Approved) Eye and Eye. Approximate weight: 3.3kg, Minimum creepage distance: 2250mm and Specified mechanical load (SML): 120 kN.



  • Pfisterer66 Kv Longrod Insulator Tongue & Clevis End Fittings

    Pfisterer66 Kv Longrod Insulator Tongue & Clevis End Fittings

    66 Kv Longrod Insulator Tongue & Clevis End Fittings

    Manufacturer: Pfisterer

    Description: 66kV Longrod Insulator (SP-AusNet Approved) Tongue and Clevis. Approximate weight: 5kg, minimum creepage distance: 2250mm and specified mechanical load (SML): 120kN.