-
Manufacturer: Fameca
Description: Multi range proving dead device. 3 ranges to 80kv. Contact device, onboard. Test Compliance IEC1243.1 2003
-
Manufacturer: Fameca
Description: Single range proving dead device to 80kV
-
Manufacturer: Fameca
Description: Single range proving dead device audio visual
-
Manufacturer: Fameca
Description: Single range proving dead device 69kV
-
Manufacturer: Horstmann
Description: The Orion.30 is a micro controlled display unit for capacitive test points with HR & LMR interface according to IEC 61243-5, 1997-06. Voltage and Phasing Out , Voltage of two phases , Phase position of these voltages relative to each other. Repeat test on coupling parts (interface monitoring). Long life lithium batteries, coupling to suit most Switchgear, clear indication, to IEC Standard .
-
Manufacturer: Horstmann
Description: The phase comparator type Compare 2.0 is a single-pole phase comparator for voltages from 5-36kV. The device is used to check either live conductor in a medium-voltage supply network for “In-phase” or “Out of phase” condition.
-
Manufacturer: Horstmann
Description: Type BL-I: Voltage detector is for indoors and outdoors; use only under dry conditions. Display visual: 1 LED, red; 1 LED, green. Display visual + audible: LED, red and horn; 1 LED, green. Rated frequency: 50 Hz (60Hz when required). Power supply: 2 BR 2/3A lithium batteries, each 1.2 Ah, 2x3 V, with 6-year operational readiness for 10 ready cycles/day and 230 work days/year. Application temperature: -25OC up to +70OC, climate class N and W.
-
Manufacturer: Fameca
Description: The TAG200BC is used to check voltage presence or absence on capacitive terminals on the unpluggable power connectors defined in the NF C 33-051 standard on electrical installations with nominal voltages between 10kV and 30 kV.
-
Manufacturer: Horstmann
Description: This phase monitor is a single-pole phasing-out instrument for voltages > 1kV in accordance with EN 61481. The instrument will show the condition “lines in or not in phase“ of two live conductors of a three-phase mains system. It can be used indoor and outdoor applications. It is controlled by a mini-controller. Four bright LEDs in the colors white, blue, green and red show the various operational conditions.
-
Manufacturer: Digivolt
Description: AC DC Digital Voltmeter and phasing instrument, 0-40kV, 0-80kV with optional R-80 Resistors.
-
Manufacturer: Digivolt
Description: AC DC Digital Voltmeter and phasing instrument w/ Capacitive Test Point Mode, 0-40kV, 0-80kV with optional R-80 Resistors.
-
Manufacturer: Horstmann
Description: Type BL-A Voltage detector is for indoors and outdoors; can be used under wet conditions. Display visual: 1 LED, red; 1 LED, green, Display visual + audible: LED, red and horn; 1 LED, green, Rated frequency: 50 Hz (60 Hz when required), Power supply: lithium batteries, 2 x 3 V, with 6-year operational readiness for 10 ready cycles/day and 230 work days/year. Application temperature: -25OC up to +70OC, climate class N and W.
-
Manufacturer: Horstmann
Description: The voltage detectors, Type BK-I and BK-A, are for single-pole feed and are used to determine whether there is an operating voltage or not. They fall in line with Category L (without contact electrode extension). Type BK-I voltage tester is for indoors and outdoors. Only to be used under dry conditions. Type BK-A voltage tester is for indoors and outdoors. It can be used under wet conditions.
-
Manufacturer: Horstmann
Description: Phase comparators are two-pole testing units for determining phase equivalence as well as differences in potential. The design of phase indicator Type PG II comprises of an actuating rod with a probe tip and display unit and an actuating rod with probe tip for obtaining the comparative value.
-
Manufacturer: Fameca
Description: 2 ranges to 66kV usually. Led1 11-33 Led2 66kV complies NFC.
-
Manufacturer: Digivolt
Description: Dual Stick Phasing Voltmeter, 0-20kV